← 카탈로그
이미지에 마우스를 올리면 확대됩니다
6722
Slot drill with corner radius (2-fluted)
Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844079403, Cutting material: Solid carbide, Surface: Cristall C, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling
기술 사양
- EAN
- 4049844079403
- Type
- N
- Surface
- Cristall C
- Designation
- Slot drill with corner radius (2-fluted)
- Helix angle
- 30
- Diameter range
- 6.000 mm – 12.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 2
규격 및 주문 코드
| 주문 코드 | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 재고 현황 | 가격 문의 |
|---|---|---|---|---|---|---|---|
| 6722 8.010 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | 문의 요망 | |
| 6722 6.010 | 17.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | 문의 요망 | |
| 6722 6.005 | 17.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | 문의 요망 | |
| 6722 10.010 | 29.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | 문의 요망 | |
| 6722 8.005 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | 문의 요망 | |
| 6722 12.010 | 35.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | 문의 요망 | |
| 6722 10.005 | 29.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | 문의 요망 | |
| 6722 12.005 | 35.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | 문의 요망 |