← 카탈로그
이미지에 마우스를 올리면 확대됩니다
3113
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093732321, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: short, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA, Feed direction: with drilling
기술 사양
- EAN
- 4031093732321
- Type
- N
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 35/38
- Diameter range
- 4.763 mm – 25.400 mm
- Feed direction
- with drilling
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
- Length picto milling
- short
- Type of machine interface
- ~HA
- Number of cutting edges range (from/to)
- 4
규격 및 주문 코드
| 주문 코드 | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | 재고 현황 | 가격 문의 |
|---|---|---|---|---|---|---|---|
| 3113 15.870 | 29.32 mm | 46.88 mm | 76.20 mm | 15.88 mm | 15.88 mm | 문의 요망 | |
| 3113 12.700 | 24.51 mm | 38.99 mm | 63.50 mm | 12.70 mm | 12.70 mm | 문의 요망 | |
| 3113 4.760 | 12.83 mm | 37.97 mm | 50.80 mm | 4.76 mm | 4.76 mm | 문의 요망 | |
| 3113 7.940 | 18.02 mm | 32.78 mm | 50.80 mm | 7.94 mm | 7.94 mm | 문의 요망 | |
| 3113 25.400 | 42.01 mm | 34.19 mm | 76.20 mm | 25.40 mm | 25.40 mm | 문의 요망 | |
| 3113 6.350 | 17.14 mm | 33.66 mm | 50.80 mm | 6.35 mm | 6.35 mm | 문의 요망 | |
| 3113 9.520 | 22.38 mm | 28.42 mm | 50.80 mm | 9.53 mm | 9.53 mm | 문의 요망 | |
| 3113 19.050 | 37.88 mm | 38.32 mm | 76.20 mm | 19.05 mm | 19.05 mm | 문의 요망 |