← ລາຍການສິນຄ້າ
ເລື່ອນເມົາສ໌ໃສ່ຮູບເພື່ອຊູມ
583
Centre drills without flat
Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 12.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093182300, Cutting material: HSS, Surface: bright, Type: N, Standard: DIN 333, Point angle: 118, Cutting direction: Right-hand, Form: R
ຂໍ້ມູນສະເພາະທາງເຕັກນິກ
- EAN
- 4031093182300
- Form
- R
- Type
- N
- Surface
- bright
- Standard
- DIN 333
- Designation
- Centre drills without flat
- Point angle
- 118
- Diameter range
- 0.500 mm – 12.500 mm
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
ຂະໜາດ ແລະ ລະຫັດສັ່ງຊື້
| ລະຫັດສັ່ງຊື້ | Flute length | Total length | Shank diameter | Nominal diameter | ຄວາມພ້ອມຂອງສິນຄ້າ | ສອບຖາມລາຄາ |
|---|---|---|---|---|---|---|
| 583 1.000 | 7.00 mm | 31.50 mm | 3.15 mm | 1.00 mm | ຕາມການຮ້ອງຂໍ | |
| 583 0.800 | 7.00 mm | 25.00 mm | 3.15 mm | 0.80 mm | ຕາມການຮ້ອງຂໍ | |
| 583 1.600 | 8.50 mm | 35.50 mm | 4.00 mm | 1.60 mm | ຕາມການຮ້ອງຂໍ | |
| 583 2.500 | 14.00 mm | 45.00 mm | 6.30 mm | 2.50 mm | ຕາມການຮ້ອງຂໍ | |
| 583 4.000 | 19.00 mm | 56.00 mm | 10.00 mm | 4.00 mm | ຕາມການຮ້ອງຂໍ | |
| 583 6.300 | 26.00 mm | 71.00 mm | 16.00 mm | 6.30 mm | ຕາມການຮ້ອງຂໍ | |
| 583 2.000 | 10.50 mm | 40.00 mm | 5.00 mm | 2.00 mm | ຕາມການຮ້ອງຂໍ | |
| 583 5.000 | 23.00 mm | 63.00 mm | 12.50 mm | 5.00 mm | ຕາມການຮ້ອງຂໍ | |
| 583 12.500 | 50.00 mm | 125.00 mm | 31.50 mm | 12.50 mm | ຕາມການຮ້ອງຂໍ | |
| 583 10.000 | 40.00 mm | 100.00 mm | 25.00 mm | 10.00 mm | ຕາມການຮ້ອງຂໍ | |
| 583 3.150 | 16.00 mm | 50.00 mm | 8.00 mm | 3.15 mm | ຕາມການຮ້ອງຂໍ | |
| 583 0.500 | 7.00 mm | 25.00 mm | 3.15 mm | 0.50 mm | ຕາມການຮ້ອງຂໍ | |
| 583 1.250 | 7.00 mm | 31.50 mm | 3.15 mm | 1.25 mm | ຕາມການຮ້ອງຂໍ | |
| 583 8.000 | 32.00 mm | 80.00 mm | 20.00 mm | 8.00 mm | ຕາມການຮ້ອງຂໍ |