End mill CR 200 for fibre-reinforced plastics

End mill CR 200 for fibre-reinforced plastics. Designation: End mill CR 200 for fibre-reinforced plastics, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4069941013230, Indicator new/addition: New, Cutting material: Solid carbide, Surface: bright, Product family: CR 200, Helix angle: 5, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Feed direction: with drilling

ຂໍ້ມູນສະເພາະທາງເຕັກນິກ

EAN: 4069941013230
Surface: bright
Designation: End mill CR 200 for fibre-reinforced plastics
Helix angle: 5
Diameter range: 4.000 mm – 12.700 mm
Feed direction: with drilling
Product family: CR 200
Back rake angle: 10
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Indicator new/addition: New
Number of cutting edges range (from/to): 6-8

ຂະໜາດ ແລະ ລະຫັດສັ່ງຊື້

ລະຫັດສັ່ງຊື້	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	ຄວາມພ້ອມຂອງສິນຄ້າ
6925 4.000	20.90 mm	36.00 mm	66.00 mm	6.00 mm	4.00 mm	ຕາມການຮ້ອງຂໍ
6925 8.000	36.05 mm	36.00 mm	75.00 mm	8.00 mm	8.00 mm	ຕາມການຮ້ອງຂໍ
6925 6.000	28.16 mm	36.00 mm	70.00 mm	6.00 mm	6.00 mm	ຕາມການຮ້ອງຂໍ
6925 10.000	41.83 mm	40.00 mm	85.00 mm	10.00 mm	10.00 mm	ຕາມການຮ້ອງຂໍ
6925 12.000	45.01 mm	45.00 mm	93.00 mm	12.00 mm	12.00 mm	ຕາມການຮ້ອງຂໍ
6925 4.762	21.10 mm	35.00 mm	63.50 mm	6.35 mm	4.76 mm	ຕາມການຮ້ອງຂໍ
6925 6.350	28.81 mm	35.00 mm	70.00 mm	6.35 mm	6.35 mm	ຕາມການຮ້ອງຂໍ
6925 9.525	37.50 mm	36.00 mm	76.00 mm	9.53 mm	9.53 mm	ຕາມການຮ້ອງຂໍ
6925 12.700	40.50 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	ຕາມການຮ້ອງຂໍ