Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844787018, Cutting material: Solid carbide, Surface: Carbo+, Product family: RF 100 A, Helix angle: 39/40/41, Back rake angle: 13, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: HA, Feed direction: with drilling

ຂໍ້ມູນສະເພາະທາງເຕັກນິກ

EAN: 4049844787018
Surface: Carbo+
Designation: Ratio end mill RF 100 AL
Helix angle: 39/40/41
Diameter range: 5.000 mm – 25.000 mm
Feed direction: with drilling
Product family: RF 100 A
Back rake angle: 13
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 3

ຂະໜາດ ແລະ ລະຫັດສັ່ງຊື້

ລະຫັດສັ່ງຊື້	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	ຄວາມພ້ອມຂອງສິນຄ້າ
8234 5.000	18.55 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	ຕາມການຮ້ອງຂໍ
8234 20.000	51.40 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	ຕາມການຮ້ອງຂໍ
8234 6.000	19.48 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	ຕາມການຮ້ອງຂໍ
8234 12.000	35.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	ຕາມການຮ້ອງຂໍ
8234 16.000	41.60 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	ຕາມການຮ້ອງຂໍ
8234 10.000	30.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	ຕາມການຮ້ອງຂໍ
8234 8.000	25.40 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	ຕາມການຮ້ອງຂໍ
8234 25.000	61.75 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	ຕາມການຮ້ອງຂໍ