← ລາຍການສິນຄ້າ
ເລື່ອນເມົາສ໌ໃສ່ຮູບເພື່ອຊູມ
3186
Roughing end mill GS 100 U(fine teeth)
Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093663656, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4-5, Feed direction: with drilling
ຂໍ້ມູນສະເພາະທາງເຕັກນິກ
- EAN
- 4031093663656
- Type
- N
- Surface
- bright
- Designation
- Roughing end mill GS 100 U(fine teeth)
- Helix angle
- 30
- Diameter range
- 6.350 mm – 25.400 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Number of cutting edges range (from/to)
- 4-5
ຂະໜາດ ແລະ ລະຫັດສັ່ງຊື້
| ລະຫັດສັ່ງຊື້ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ຄວາມພ້ອມຂອງສິນຄ້າ | ສອບຖາມລາຄາ |
|---|---|---|---|---|---|---|---|
| 3186 12.700 | 33.50 mm | 42.70 mm | 76.20 mm | 12.70 mm | 12.70 mm | ຕາມການຮ້ອງຂໍ | |
| 3186 6.350 | 23.50 mm | 40.00 mm | 63.50 mm | 6.35 mm | 6.35 mm | ຕາມການຮ້ອງຂໍ | |
| 3186 7.940 | 23.50 mm | 40.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | ຕາມການຮ້ອງຂໍ | |
| 3186 9.520 | 28.00 mm | 35.50 mm | 63.50 mm | 9.53 mm | 9.53 mm | ຕາມການຮ້ອງຂໍ | |
| 3186 19.050 | 51.50 mm | 50.10 mm | 101.60 mm | 19.05 mm | 19.05 mm | ຕາມການຮ້ອງຂໍ | |
| 3186 25.400 | 58.50 mm | 43.10 mm | 101.60 mm | 25.40 mm | 25.40 mm | ຕາມການຮ້ອງຂໍ | |
| 3186 15.870 | 40.00 mm | 48.90 mm | 88.90 mm | 15.88 mm | 15.88 mm | ຕາມການຮ້ອງຂໍ |