← ລາຍການສິນຄ້າ
ເລື່ອນເມົາສ໌ໃສ່ຮູບເພື່ອຊູມ
5730
Slot drill (2-fluted)
Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093685092, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling
ຂໍ້ມູນສະເພາະທາງເຕັກນິກ
- EAN
- 4031093685092
- Type
- N
- Designation
- Slot drill (2-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 2.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 2
ຂະໜາດ ແລະ ລະຫັດສັ່ງຊື້
| ລະຫັດສັ່ງຊື້ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ຄວາມພ້ອມຂອງສິນຄ້າ | ສອບຖາມລາຄາ |
|---|---|---|---|---|---|---|---|
| 5730 16.000 | 42.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 12.000 | 35.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 4.000 | 12.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 14.000 | 36.00 mm | 45.00 mm | 83.00 mm | 14.00 mm | 14.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 10.000 | 29.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 6.000 | 17.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 20.000 | 51.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 8.000 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 9.000 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 9.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 5.000 | 15.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 7.000 | 21.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 7.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 3.000 | 11.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 2.000 | 8.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 2.00 mm | ຕາມການຮ້ອງຂໍ | |
| 5730 18.000 | 43.00 mm | 48.00 mm | 92.00 mm | 18.00 mm | 18.00 mm | ຕາມການຮ້ອງຂໍ |