← ລາຍການສິນຄ້າ
ເລື່ອນເມົາສ໌ໃສ່ຮູບເພື່ອຊູມ
3100
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 9.525 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093763028, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Feed direction: with drilling
ຂໍ້ມູນສະເພາະທາງເຕັກນິກ
- EAN
- 4031093763028
- Type
- N
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 35/38
- Diameter range
- 9.525 mm – 25.400 mm
- Feed direction
- with drilling
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- ~HB
- Number of cutting edges range (from/to)
- 4
ຂະໜາດ ແລະ ລະຫັດສັ່ງຊື້
| ລະຫັດສັ່ງຊື້ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ຄວາມພ້ອມຂອງສິນຄ້າ | ສອບຖາມລາຄາ |
|---|---|---|---|---|---|---|---|
| 3100 19.050 | 50.38 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | ຕາມການຮ້ອງຂໍ | |
| 3100 15.870 | 42.32 mm | 48.40 mm | 88.90 mm | 15.88 mm | 15.88 mm | ຕາມການຮ້ອງຂໍ | |
| 3100 25.400 | 54.51 mm | 58.00 mm | 101.60 mm | 25.40 mm | 25.40 mm | ຕາມການຮ້ອງຂໍ | |
| 3100 9.520 | 31.88 mm | 39.70 mm | 63.50 mm | 9.53 mm | 9.53 mm | ຕາມການຮ້ອງຂໍ | |
| 3100 12.700 | 34.01 mm | 45.20 mm | 76.20 mm | 12.70 mm | 12.70 mm | ຕາມການຮ້ອງຂໍ |