← ລາຍການສິນຄ້າ
ເລື່ອນເມົາສ໌ໃສ່ຮູບເພື່ອຊູມ
3201
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093634717, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling
ຂໍ້ມູນສະເພາະທາງເຕັກນິກ
- EAN
- 4031093634717
- Type
- N
- Surface
- bright
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 35/38
- Diameter range
- 4.000 mm – 25.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 4
ຂະໜາດ ແລະ ລະຫັດສັ່ງຊື້
| ລະຫັດສັ່ງຊື້ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ຄວາມພ້ອມຂອງສິນຄ້າ | ສອບຖາມລາຄາ |
|---|---|---|---|---|---|---|---|
| 3201 6.000 | 17.20 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 12.000 | 34.04 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 8.000 | 24.36 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 5.000 | 16.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 18.000 | 43.70 mm | 48.00 mm | 92.00 mm | 18.00 mm | 18.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 10.000 | 28.70 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 4.000 | 13.80 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 16.000 | 42.40 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 20.000 | 51.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 14.000 | 35.38 mm | 45.00 mm | 83.00 mm | 14.00 mm | 14.00 mm | ຕາມການຮ້ອງຂໍ | |
| 3201 25.000 | 61.25 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | ຕາມການຮ້ອງຂໍ |