← ລາຍການສິນຄ້າ
ເລື່ອນເມົາສ໌ໃສ່ຮູບເພື່ອຊູມ
1946
Twist drill with reinforced straight shank
Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.600 mm – 14.100 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844007932, Cutting material: Solid carbide, Surface: TiAlN, Type: H, Drilling depth: 3xD, Standard: DIN 6537K, Point angle: 120, Tolerance class nominal diameter: m7, Cutting direction: Right-hand, Type of machine interface: HA, Form: A
ຂໍ້ມູນສະເພາະທາງເຕັກນິກ
- EAN
- 4049844007932
- Form
- A
- Type
- H
- Surface
- TiAlN
- Standard
- DIN 6537K
- Designation
- Twist drill with reinforced straight shank
- Point angle
- 120
- Diameter range
- 2.600 mm – 14.100 mm
- Drilling depth
- 3xD
- Cutting material
- Solid carbide
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Type of machine interface
- HA
- Tolerance class nominal diameter
- m7
ຂະໜາດ ແລະ ລະຫັດສັ່ງຊື້
| ລະຫັດສັ່ງຊື້ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ຄວາມພ້ອມຂອງສິນຄ້າ | ສອບຖາມລາຄາ |
|---|---|---|---|---|---|---|---|
| 1946 11.100 | 55.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 11.10 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 4.300 | 24.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 4.30 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 4.000 | 24.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 4.00 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 2.600 | 20.00 mm | 36.00 mm | 62.00 mm | 6.00 mm | 2.60 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 5.000 | 28.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 5.00 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 3.400 | 20.00 mm | 36.00 mm | 62.00 mm | 6.00 mm | 3.40 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 12.000 | 55.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 12.00 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 8.600 | 47.00 mm | 40.00 mm | 89.00 mm | 10.00 mm | 8.60 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 5.100 | 28.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 5.10 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 9.100 | 47.00 mm | 40.00 mm | 89.00 mm | 10.00 mm | 9.10 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 6.900 | 34.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 6.90 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 10.400 | 55.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 10.40 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 10.600 | 55.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 10.60 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 10.000 | 47.00 mm | 40.00 mm | 89.00 mm | 10.00 mm | 10.00 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 14.100 | 65.00 mm | 48.00 mm | 115.00 mm | 16.00 mm | 14.10 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 8.000 | 41.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 8.00 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 5.600 | 28.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 5.60 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 7.100 | 41.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 7.10 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 3.000 | 20.00 mm | 36.00 mm | 62.00 mm | 6.00 mm | 3.00 mm | ຕາມການຮ້ອງຂໍ | |
| 1946 6.000 | 28.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 6.00 mm | ຕາມການຮ້ອງຂໍ |