Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093388979, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

තාක්ෂණික පිරිවිතර

EAN: 4031093388979
Type: N
Designation: Ball nose end mill (4-fluted)
Helix angle: 30
Diameter range: 4.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

මානයන් සහ ඇණවුම් කේත

ඇණවුම් කේතය	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	ලබා ගත හැකි බව
3727 12.000	37.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	ඉල්ලීම මත
3727 18.001	54.56 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	ඉල්ලීම මත
3727 8.000	27.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	ඉල්ලීම මත
3727 16.000	46.72 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	ඉල්ලීම මත
3727 4.000	15.00 mm	28.00 mm	50.00 mm	4.00 mm	4.00 mm	ඉල්ලීම මත
3727 6.000	19.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	ඉල්ලීම මත
3727 5.000	18.00 mm	28.00 mm	50.00 mm	5.00 mm	5.00 mm	ඉල්ලීම මත
3727 14.000	38.88 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	ඉල්ලීම මත
3727 14.001	44.88 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	ඉල්ලීම මත
3727 20.000	56.40 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	ඉල්ලීම මත
3727 10.000	32.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	ඉල්ලීම මත
3727 18.000	48.56 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	ඉල්ලීම මත