Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844152717, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: -7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA/HA, Feed direction: with drilling

තාක්ෂණික පිරිවිතර

EAN: 4049844152717
Type: H
Surface: Signum
Designation: Ball nose hard profile cutter GF 300 B
Helix angle: 30
Diameter range: 2.000 mm – 12.000 mm
Feed direction: with drilling
Back rake angle: -7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: long
Type of machine interface: ~HA/HA
Number of cutting edges range (from/to): 4

මානයන් සහ ඇණවුම් කේත

ඇණවුම් කේතය	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	ලබා ගත හැකි බව
4246 8.000	15.16 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	ඉල්ලීම මත
4246 6.000	12.12 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	ඉල්ලීම මත
4246 4.000	8.20 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	ඉල්ලීම මත
4246 12.000	22.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	ඉල්ලීම මත
4246 5.000	10.25 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	ඉල්ලීම මත
4246 10.000	18.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	ඉල්ලීම මත
4246 3.000	6.65 mm	36.10 mm	57.00 mm	6.00 mm	3.00 mm	ඉල්ලීම මත
4246 2.000	5.10 mm	35.90 mm	57.00 mm	6.00 mm	2.00 mm	ඉල්ලීම මත