← නාමාවලිය
විශාලනය කිරීමට රූපය මත මවුසය ගෙන යන්න
6971
Ratio roughing end mill RF 100 U
Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}], EAN: 4049844301221, Cutting material: Solid carbide, Surface: Signum, Product family: RF 100 U, Helix angle: 36/38, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Corner design: Eckenfase 45°, Feed direction: with drilling
තාක්ෂණික පිරිවිතර
- EAN
- 4049844301221
- Surface
- Signum
- Designation
- Ratio roughing end mill RF 100 U
- Helix angle
- 36/38
- Corner design
- Eckenfase 45°
- Diameter range
- 6.000 mm – 20.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 U
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 4
මානයන් සහ ඇණවුම් කේත
| ඇණවුම් කේතය | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ලබා ගත හැකි බව | මිල විමසන්න |
|---|---|---|---|---|---|---|---|
| 6971 6.000 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | ඉල්ලීම මත | |
| 6971 16.000 | 42.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | ඉල්ලීම මත | |
| 6971 12.000 | 34.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | ඉල්ලීම මත | |
| 6971 20.000 | 50.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | ඉල්ලීම මත | |
| 6971 10.000 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | ඉල්ලීම මත | |
| 6971 8.000 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | ඉල්ලීම මත |