Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093674836, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

තාක්ෂණික පිරිවිතර

EAN: 4031093674836
Type: N
Surface: bright
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 4.000 mm – 25.000 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

මානයන් සහ ඇණවුම් කේත

ඇණවුම් කේතය	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	ලබා ගත හැකි බව
3208 18.000	43.70 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	ඉල්ලීම මත
3208 4.000	13.80 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	ඉල්ලීම මත
3208 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	ඉල්ලීම මත
3208 8.000	24.36 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	ඉල්ලීම මත
3208 12.000	34.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	ඉල්ලීම මත
3208 16.000	42.40 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	ඉල්ලීම මත
3208 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	ඉල්ලීම මත
3208 6.000	17.20 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	ඉල්ලීම මත
3208 14.000	35.38 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	ඉල්ලීම මත
3208 10.000	28.70 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	ඉල්ලීම මත
3208 25.000	61.25 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	ඉල්ලීම මත