← Katalogas
Užveskite pelę ant vaizdo, kad priartintumėte
6165
Ratio end mill RF 100 Sharp short shank
Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844973015, Indicator new/addition: New, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 11, Length picto milling: medium, Number of cutting edges range (from/to): 4, Feed direction: with drilling
Techninės specifikacijos
- EAN
- 4049844973015
- Type
- N
- Surface
- AlCrN
- Designation
- Ratio end mill RF 100 Sharp short shank
- Helix angle
- 38
- Diameter range
- 1.000 mm – 3.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Indicator new/addition
- New
- Number of cutting edges range (from/to)
- 4
Matmenys ir užsakymo kodai
| Užsakymo kodas | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Prieinamumas | Užklausti kainos |
|---|---|---|---|---|---|---|---|
| 6165 3.000 | 12.10 mm | 21.10 mm | 48.00 mm | 6.00 mm | 3.00 mm | Pagal užklausą | |
| 6165 2.500 | 9.25 mm | 21.40 mm | 44.00 mm | 6.00 mm | 2.50 mm | Pagal užklausą | |
| 6165 1.000 | 3.80 mm | 23.80 mm | 36.00 mm | 4.00 mm | 1.00 mm | Pagal užklausą | |
| 6165 2.000 | 7.40 mm | 23.30 mm | 44.00 mm | 6.00 mm | 2.00 mm | Pagal užklausą | |
| 6165 1.500 | 5.70 mm | 21.90 mm | 36.00 mm | 4.00 mm | 1.50 mm | Pagal užklausą |