← Katalogas
Užveskite pelę ant vaizdo, kad priartintumėte
19964
Roughing end mill with fine teeth
Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"full"}], EAN: 4049844199286, Cutting material: Solid carbide, Type: H, Helix angle: 20, Length picto milling: short, Number of cutting edges range (from/to): 3-4, Type of machine interface: HA
Techninės specifikacijos
- EAN
- 4049844199286
- Type
- H
- Designation
- Roughing end mill with fine teeth
- Helix angle
- 20
- Diameter range
- 4.000 mm – 20.000 mm
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"full"}]
- Length picto milling
- short
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 3-4
Matmenys ir užsakymo kodai
| Užsakymo kodas | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Prieinamumas | Užklausti kainos |
|---|---|---|---|---|---|---|---|
| 19964 5.000 | 13.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 5.00 mm | Pagal užklausą | |
| 19964 16.000 | 31.00 mm | 48.00 mm | 82.00 mm | 16.00 mm | 16.00 mm | Pagal užklausą | |
| 19964 6.000 | 14.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 6.00 mm | Pagal užklausą | |
| 19964 12.000 | 26.00 mm | 45.00 mm | 73.00 mm | 12.00 mm | 12.00 mm | Pagal užklausą | |
| 19964 20.000 | 33.00 mm | 50.00 mm | 92.00 mm | 20.00 mm | 20.00 mm | Pagal užklausą | |
| 19964 10.000 | 21.00 mm | 40.00 mm | 66.00 mm | 10.00 mm | 10.00 mm | Pagal užklausą | |
| 19964 8.000 | 17.50 mm | 36.00 mm | 58.00 mm | 8.00 mm | 8.00 mm | Pagal užklausą | |
| 19964 4.000 | 12.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 4.00 mm | Pagal užklausą |