← Каталог
Пређите мишем преко слике за увећање
3359
Ball nose hard profile cutter GF 300 B
Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093675345, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: -7, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: ~HA/HA, Feed direction: with drilling
Техничке спецификације
- EAN
- 4031093675345
- Type
- H
- Surface
- Signum
- Designation
- Ball nose hard profile cutter GF 300 B
- Helix angle
- 30
- Diameter range
- 0.500 mm – 16.000 mm
- Feed direction
- with drilling
- Back rake angle
- -7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 2
Димензије и шифре за наручивање
| Шифра за наручивање | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Доступност | Затражите цену |
|---|---|---|---|---|---|---|---|
| 3359 16.000 | 43.20 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | На упит | |
| 3359 4.000 | 10.80 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | На упит | |
| 3359 1.500 | 4.35 mm | 28.00 mm | 38.00 mm | 3.00 mm | 1.50 mm | На упит | |
| 3359 10.000 | 27.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | На упит | |
| 3359 5.000 | 14.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | На упит | |
| 3359 8.000 | 21.60 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | На упит | |
| 3359 12.000 | 32.40 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | На упит | |
| 3359 6.000 | 16.20 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | На упит | |
| 3359 0.800 | 2.32 mm | 28.10 mm | 38.00 mm | 3.00 mm | 0.80 mm | На упит | |
| 3359 0.500 | 1.45 mm | 28.20 mm | 38.00 mm | 3.00 mm | 0.50 mm | На упит | |
| 3359 1.000 | 2.90 mm | 28.10 mm | 38.00 mm | 3.00 mm | 1.00 mm | На упит | |
| 3359 3.000 | 9.20 mm | 36.50 mm | 57.00 mm | 6.00 mm | 3.00 mm | На упит | |
| 3359 2.000 | 5.80 mm | 35.80 mm | 57.00 mm | 6.00 mm | 2.00 mm | На упит |