End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844195516, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Corner design: Schneidecke 90°

Fastebisch data

EAN: 4049844195516
Type: N
Designation: End mill XL (4-fluted)
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: extra long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Awewe me order codes

Order code	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	E lo me esapw lo
19977 10.000	55.00 mm	40.00 mm	95.00 mm	10.00 mm	10.00 mm	Wóól tingór
19977 6.000	30.00 mm	36.00 mm	68.00 mm	6.00 mm	6.00 mm	Wóól tingór
19977 16.000	77.72 mm	48.00 mm	125.00 mm	16.00 mm	16.00 mm	Wóól tingór
19977 14.000	65.88 mm	45.00 mm	110.00 mm	14.00 mm	14.00 mm	Wóól tingór
19977 3.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Wóól tingór
19977 8.000	46.00 mm	36.00 mm	88.00 mm	8.00 mm	8.00 mm	Wóól tingór
19977 18.000	79.56 mm	48.00 mm	125.00 mm	18.00 mm	18.00 mm	Wóól tingór
19977 20.000	93.40 mm	50.00 mm	141.00 mm	20.00 mm	20.00 mm	Wóól tingór
19977 5.000	29.00 mm	36.00 mm	68.00 mm	6.00 mm	5.00 mm	Wóól tingór
19977 12.000	64.04 mm	45.00 mm	110.00 mm	12.00 mm	12.00 mm	Wóól tingór
19977 4.000	23.00 mm	36.00 mm	63.00 mm	6.00 mm	4.00 mm	Wóól tingór