Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093674614, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HA

Fastebisch data

EAN: 4031093674614
Type: H
Surface: Signum
Designation: Hard multi-tooth end mill GH 100 H
Helix angle: 55
Diameter range: 3.000 mm – 20.000 mm
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 6-8

Awewe me order codes

Order code	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	E lo me esapw lo
3715 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Wóól tingór
3715 18.001	46.00 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	Wóól tingór
3715 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Wóól tingór
3715 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Wóól tingór
3715 18.000	40.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Wóól tingór
3715 4.000	14.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Wóól tingór
3715 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Wóól tingór
3715 14.001	38.00 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	Wóól tingór
3715 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Wóól tingór
3715 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Wóól tingór
3715 12.000	32.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Wóól tingór
3715 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Wóól tingór
3715 16.000	39.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Wóól tingór