HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844394681, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Fastebisch data

EAN: 4049844394681
Type: N
Surface: AlCrN
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HA
Number of cutting edges range (from/to): 4

Awewe me order codes

Order code	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	E lo me esapw lo
19950 5.000	16.50 mm	32.00 mm	50.00 mm	5.00 mm	5.00 mm	Wóól tingór
19950 16.000	40.00 mm	36.00 mm	75.00 mm	16.00 mm	16.00 mm	Wóól tingór
19950 10.000	33.00 mm	36.00 mm	70.00 mm	10.00 mm	10.00 mm	Wóól tingór
19950 8.000	25.00 mm	31.00 mm	60.00 mm	8.00 mm	8.00 mm	Wóól tingór
19950 3.000	10.50 mm	36.00 mm	50.00 mm	4.00 mm	3.00 mm	Wóól tingór
19950 14.000	39.00 mm	36.00 mm	75.00 mm	14.00 mm	14.00 mm	Wóól tingór
19950 4.000	14.00 mm	32.00 mm	50.00 mm	4.00 mm	4.00 mm	Wóól tingór
19950 20.000	52.00 mm	46.00 mm	100.00 mm	20.00 mm	20.00 mm	Wóól tingór
19950 12.000	38.00 mm	36.00 mm	75.00 mm	12.00 mm	12.00 mm	Wóól tingór
19950 6.000	20.00 mm	30.00 mm	50.00 mm	6.00 mm	6.00 mm	Wóól tingór