Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093636063, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Fastebisch data

EAN: 4031093636063
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 4.000 mm – 25.000 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Awewe me order codes

Order code	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	E lo me esapw lo
5535 6.000	17.20 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Wóól tingór
5535 14.000	35.38 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Wóól tingór
5535 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Wóól tingór
5535 8.000	24.36 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Wóól tingór
5535 12.000	34.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Wóól tingór
5535 16.000	42.40 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Wóól tingór
5535 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Wóól tingór
5535 18.000	43.70 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Wóól tingór
5535 10.000	28.70 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Wóól tingór
5535 25.000	61.25 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	Wóól tingór
5535 4.000	13.80 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Wóól tingór