← الكتالوج
مرر المؤشر فوق الصورة للتكبير
6771
HSC end mills High Feed HF 300
HSC end mills High Feed HF 300. Designation: HSC end mills High Feed HF 300, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844180833, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 30, Back rake angle: -7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA/HA, Corner design: Schneidecke 90°
المواصفات الفنية
- EAN
- 4049844180833
- Type
- H
- Surface
- Signum
- Designation
- HSC end mills High Feed HF 300
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 3.000 mm – 16.000 mm
- Back rake angle
- -7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 4
الأبعاد ورموز الطلب
| رمز الطلب | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | التوفر | طلب السعر |
|---|---|---|---|---|---|---|---|
| 6771 6.000 | 11.12 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | عند الطلب | |
| 6771 5.000 | 9.25 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | عند الطلب | |
| 6771 8.000 | 14.16 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | عند الطلب | |
| 6771 10.000 | 18.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | عند الطلب | |
| 6771 16.000 | 27.52 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | عند الطلب | |
| 6771 12.000 | 22.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | عند الطلب | |
| 6771 4.000 | 7.20 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | عند الطلب | |
| 6771 3.000 | 5.15 mm | 37.70 mm | 57.00 mm | 6.00 mm | 3.00 mm | عند الطلب |