Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093646192, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 45, Back rake angle: 25, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HB, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4031093646192
Type: W
Surface: bright
Designation: Al slot drill (2-fluted)
Helix angle: 45
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 25
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 2

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
3059 10.000	27.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Fuq talba
3059 12.000	31.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Fuq talba
3059 3.000	10.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Fuq talba
3059 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Fuq talba
3059 4.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Fuq talba
3059 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Fuq talba
3059 6.000	16.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Fuq talba
3059 8.000	23.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Fuq talba
3059 16.000	37.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Fuq talba
3059 18.000	38.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Fuq talba
3059 5.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Fuq talba