Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093646314, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 45, Back rake angle: 25, Length picto milling: short, Number of cutting edges range (from/to): 2, Type of machine interface: HB, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4031093646314
Type: W
Surface: bright
Designation: Al slot drill (2-fluted)
Helix angle: 45
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 25
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: short
Type of machine interface: HB
Number of cutting edges range (from/to): 2

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
3126 12.000	21.00 mm	45.00 mm	73.00 mm	12.00 mm	12.00 mm	Fuq talba
3126 4.000	8.00 mm	36.00 mm	54.00 mm	6.00 mm	4.00 mm	Fuq talba
3126 14.000	24.00 mm	45.00 mm	75.00 mm	14.00 mm	14.00 mm	Fuq talba
3126 6.000	13.00 mm	36.00 mm	54.00 mm	6.00 mm	6.00 mm	Fuq talba
3126 8.000	16.00 mm	36.00 mm	58.00 mm	8.00 mm	8.00 mm	Fuq talba
3126 5.000	10.00 mm	36.00 mm	54.00 mm	6.00 mm	5.00 mm	Fuq talba
3126 10.000	19.00 mm	40.00 mm	66.00 mm	10.00 mm	10.00 mm	Fuq talba
3126 20.000	34.00 mm	50.00 mm	92.00 mm	20.00 mm	20.00 mm	Fuq talba
3126 16.000	27.00 mm	48.00 mm	82.00 mm	16.00 mm	16.00 mm	Fuq talba
3126 18.000	30.00 mm	48.00 mm	84.00 mm	18.00 mm	18.00 mm	Fuq talba
3126 3.000	7.00 mm	36.00 mm	50.00 mm	6.00 mm	3.00 mm	Fuq talba