Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093376686, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4031093376686
Type: N
Surface: bright
Designation: Ball nose end mill (4-fluted)
Helix angle: 30
Diameter range: 4.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
3306 10.000	32.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Fuq talba
3306 14.001	44.88 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	Fuq talba
3306 18.001	54.56 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	Fuq talba
3306 14.000	38.88 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Fuq talba
3306 4.000	15.00 mm	28.00 mm	50.00 mm	4.00 mm	4.00 mm	Fuq talba
3306 16.000	46.72 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Fuq talba
3306 5.000	18.00 mm	28.00 mm	50.00 mm	5.00 mm	5.00 mm	Fuq talba
3306 8.000	27.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Fuq talba
3306 12.000	37.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Fuq talba
3306 20.000	56.40 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Fuq talba
3306 18.000	48.56 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Fuq talba
3306 6.000	19.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Fuq talba