← Katalgu
Għaddi l-maws minn fuq l-immaġni biex tkabbar
483
Counterbore fixed pilots for medium tolerances
Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093125772, Cutting material: HSS, Surface: bright, Standard: DIN 373, Cutting direction: Right-hand
Speċifikazzjonijiet tekniċi
- EAN
- 4031093125772
- Surface
- bright
- Standard
- DIN 373
- Designation
- Counterbore fixed pilots for medium tolerances
- Diameter range
- 6.000 mm – 20.000 mm
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
Dimensjonijiet u kodiċijiet tal-ordni
| Kodiċi tal-ordni | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibbiltà | Itlob prezz |
|---|---|---|---|---|---|---|---|
| 483 18.000 | 43.00 mm | 40.00 mm | 100.00 mm | 12.50 mm | 18.00 mm | Fuq talba | |
| 483 15.000 | 43.00 mm | 40.00 mm | 100.00 mm | 12.50 mm | 15.00 mm | Fuq talba | |
| 483 11.000 | 35.00 mm | 35.50 mm | 80.00 mm | 8.00 mm | 11.00 mm | Fuq talba | |
| 483 8.000 | 26.00 mm | 31.50 mm | 71.00 mm | 5.00 mm | 8.00 mm | Fuq talba | |
| 483 20.000 | 43.00 mm | 40.00 mm | 100.00 mm | 12.50 mm | 20.00 mm | Fuq talba | |
| 483 10.000 | 35.00 mm | 35.50 mm | 80.00 mm | 8.00 mm | 10.00 mm | Fuq talba | |
| 483 6.000 | 26.00 mm | 31.50 mm | 71.00 mm | 5.00 mm | 6.00 mm | Fuq talba | |
| 483 6.500 | 26.00 mm | 31.50 mm | 71.00 mm | 5.00 mm | 6.50 mm | Fuq talba |