End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844291096, Cutting material: Solid carbide, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: Cyl, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4049844291096
Type: N
Designation: End mill (4-fluted)
Helix angle: 35/38
Diameter range: 3.175 mm – 25.400 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: Cyl
Number of cutting edges range (from/to): 4

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
19959 19.050	50.00 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	Fuq talba
19959 15.870	42.00 mm	46.90 mm	88.90 mm	15.88 mm	15.88 mm	Fuq talba
19959 7.940	25.50 mm	38.00 mm	63.50 mm	7.94 mm	7.94 mm	Fuq talba
19959 6.350	24.00 mm	39.50 mm	63.50 mm	6.35 mm	6.35 mm	Fuq talba
19959 9.520	31.50 mm	32.00 mm	63.50 mm	9.53 mm	9.53 mm	Fuq talba
19959 12.700	34.50 mm	41.70 mm	76.20 mm	12.70 mm	12.70 mm	Fuq talba
19959 25.400	54.00 mm	47.60 mm	101.60 mm	25.40 mm	25.40 mm	Fuq talba
19959 3.170	12.50 mm	25.60 mm	38.10 mm	3.17 mm	3.17 mm	Fuq talba
19959 11.110	32.50 mm	37.35 mm	69.85 mm	11.11 mm	11.11 mm	Fuq talba
19959 4.760	19.50 mm	31.30 mm	50.80 mm	4.76 mm	4.76 mm	Fuq talba