Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093674614, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HA

Speċifikazzjonijiet tekniċi

EAN: 4031093674614
Type: H
Surface: Signum
Designation: Hard multi-tooth end mill GH 100 H
Helix angle: 55
Diameter range: 3.000 mm – 20.000 mm
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 6-8

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
3715 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Fuq talba
3715 18.001	46.00 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	Fuq talba
3715 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Fuq talba
3715 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Fuq talba
3715 18.000	40.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Fuq talba
3715 4.000	14.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Fuq talba
3715 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Fuq talba
3715 14.001	38.00 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	Fuq talba
3715 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Fuq talba
3715 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Fuq talba
3715 12.000	32.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Fuq talba
3715 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Fuq talba
3715 16.000	39.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Fuq talba