HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844394537, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4049844394537
Type: N
Surface: AlCrN
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: medium
Type of machine interface: ~HA
Number of cutting edges range (from/to): 4

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
19951 14.000	62.00 mm	38.00 mm	100.00 mm	14.00 mm	14.00 mm	Fuq talba
19951 10.000	56.00 mm	40.00 mm	100.00 mm	10.00 mm	10.00 mm	Fuq talba
19951 12.000	61.00 mm	39.00 mm	100.00 mm	12.00 mm	12.00 mm	Fuq talba
19951 3.000	18.50 mm	37.00 mm	60.00 mm	4.00 mm	3.00 mm	Fuq talba
19951 20.000	87.00 mm	50.00 mm	141.00 mm	20.00 mm	20.00 mm	Fuq talba
19951 16.000	73.00 mm	48.00 mm	125.00 mm	16.00 mm	16.00 mm	Fuq talba
19951 4.000	23.00 mm	37.00 mm	60.00 mm	4.00 mm	4.00 mm	Fuq talba
19951 8.000	43.00 mm	36.00 mm	88.00 mm	8.00 mm	8.00 mm	Fuq talba
19951 6.000	29.00 mm	36.00 mm	68.00 mm	6.00 mm	6.00 mm	Fuq talba
19951 5.000	27.50 mm	37.00 mm	68.00 mm	6.00 mm	5.00 mm	Fuq talba