Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093685443, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 6-10, Type of machine interface: HA, Corner design: Schneidecke 90°

Speċifikazzjonijiet tekniċi

EAN: 4031093685443
Type: N
Designation: Multi-tooth end mill GH 100 U
Helix angle: 45
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 25.000 mm
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 6-10

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
5745 10.000	26.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Fuq talba
5745 3.000	9.20 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Fuq talba
5745 6.000	15.40 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Fuq talba
5745 5.000	15.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Fuq talba
5745 14.000	31.60 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Fuq talba
5745 8.000	22.20 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Fuq talba
5745 18.000	37.94 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Fuq talba
5745 12.000	30.80 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Fuq talba
5745 4.000	12.60 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Fuq talba
5745 16.000	38.40 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Fuq talba
5745 20.000	44.60 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Fuq talba
5745 25.000	53.25 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	Fuq talba