Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844090583, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Helix angle: 39/40/41, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: HB, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4049844090583
Surface: bright
Designation: Ratio end mill RF 100 AL
Helix angle: 39/40/41
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Product family: RF 100 A
Back rake angle: 10
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 3

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
6702 20.000	52.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Fuq talba
6702 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Fuq talba
6702 3.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Fuq talba
6702 8.000	26.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Fuq talba
6702 12.000	35.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Fuq talba
6702 16.000	43.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Fuq talba
6702 6.000	19.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Fuq talba
6702 10.000	30.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Fuq talba
6702 5.000	17.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Fuq talba