← Katalgu
Għaddi l-maws minn fuq l-immaġni biex tkabbar
6730
Ratio end mill RF 100 AL
Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844138087, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Helix angle: 39/40/41, Back rake angle: 10, Length picto milling: 3xD, Number of cutting edges range (from/to): 3, Type of machine interface: HA, Feed direction: with drilling
Speċifikazzjonijiet tekniċi
- EAN
- 4049844138087
- Surface
- bright
- Designation
- Ratio end mill RF 100 AL
- Helix angle
- 39/40/41
- Diameter range
- 5.000 mm – 20.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 A
- Back rake angle
- 10
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- 3xD
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 3
Dimensjonijiet u kodiċijiet tal-ordni
| Kodiċi tal-ordni | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibbiltà | Itlob prezz |
|---|---|---|---|---|---|---|---|
| 6730 6.000 | 23.52 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | Fuq talba | |
| 6730 10.000 | 38.80 mm | 40.00 mm | 80.00 mm | 10.00 mm | 10.00 mm | Fuq talba | |
| 6730 12.000 | 46.08 mm | 45.00 mm | 93.00 mm | 12.00 mm | 12.00 mm | Fuq talba | |
| 6730 5.000 | 19.80 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Fuq talba | |
| 6730 16.000 | 60.96 mm | 48.00 mm | 108.00 mm | 16.00 mm | 16.00 mm | Fuq talba | |
| 6730 20.000 | 77.00 mm | 50.00 mm | 126.00 mm | 20.00 mm | 20.00 mm | Fuq talba | |
| 6730 8.000 | 31.04 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | Fuq talba |