Ratio end mill RF 100 AL 90°

Ratio end mill RF 100 AL 90°. Designation: Ratio end mill RF 100 AL 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844154490, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4049844154490
Surface: bright
Designation: Ratio end mill RF 100 AL 90°
Helix angle: 40/42
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Product family: RF 100 A
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
6762 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Fuq talba
6762 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Fuq talba
6762 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Fuq talba
6762 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Fuq talba
6762 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Fuq talba
6762 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Fuq talba
6762 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Fuq talba
6762 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Fuq talba
6762 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Fuq talba