Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844144408, Cutting material: Solid carbide, Surface: Signum, Type: N, Helix angle: 36/38/37, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA/~HB, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4049844144408
Type: N
Surface: Signum
Designation: Ratio end mill RF 100 Diver
Helix angle: 36/38/37
Diameter range: 3.175 mm – 25.400 mm
Feed direction: with drilling
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HA/~HB
Number of cutting edges range (from/to): 4

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
6757 25.400	53.75 mm	58.00 mm	127.00 mm	25.40 mm	25.40 mm	Fuq talba
6757 12.700	34.29 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	Fuq talba
6757 7.940	24.61 mm	38.00 mm	63.50 mm	7.94 mm	7.94 mm	Fuq talba
6757 15.870	43.11 mm	48.40 mm	88.90 mm	15.88 mm	15.88 mm	Fuq talba
6757 11.110	30.00 mm	38.65 mm	69.85 mm	11.11 mm	11.11 mm	Fuq talba
6757 3.170	8.57 mm	28.75 mm	38.10 mm	3.17 mm	3.17 mm	Fuq talba
6757 9.520	28.87 mm	33.50 mm	63.50 mm	9.53 mm	9.53 mm	Fuq talba
6757 4.760	12.83 mm	36.30 mm	50.80 mm	4.76 mm	4.76 mm	Fuq talba
6757 19.050	51.34 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	Fuq talba
6757 6.350	17.14 mm	44.30 mm	63.50 mm	6.35 mm	6.35 mm	Fuq talba