Ratio end mill RF 100 F 90°

Ratio end mill RF 100 F 90°. Designation: Ratio end mill RF 100 F 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844154339, Cutting material: Solid carbide, Surface: nanoA, Type: N, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4049844154339
Type: N
Surface: nanoA
Designation: Ratio end mill RF 100 F 90°
Helix angle: 40/42
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
6764 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Fuq talba
6764 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Fuq talba
6764 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Fuq talba
6764 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Fuq talba
6764 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Fuq talba
6764 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Fuq talba
6764 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Fuq talba
6764 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Fuq talba
6764 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Fuq talba