Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844492257, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38/40, Back rake angle: 12, Length picto milling: long+, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4049844492257
Type: N
Surface: AlCrN
Designation: Ratio end mill RF 100 Sharp
Helix angle: 38/40
Diameter range: 4.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 12
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: long+
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
6479 4.000	16.60 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Fuq talba
6479 12.000	32.80 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Fuq talba
6479 5.000	17.25 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Fuq talba
6479 10.000	29.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Fuq talba
6479 6.000	18.70 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Fuq talba
6479 14.000	33.60 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Fuq talba
6479 8.000	24.60 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Fuq talba
6479 16.000	42.40 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Fuq talba
6479 20.000	49.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Fuq talba