← Katalgu
Għaddi l-maws minn fuq l-immaġni biex tkabbar
3706
Ratio end mill RF 40
Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 16.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093387712, Cutting material: HSS, Type: N, Helix angle: 30/32, Back rake angle: 11, Length picto milling: medium, Number of cutting edges range (from/to): 4-6, Type of machine interface: B, Corner design: Schneidecke 90°
Speċifikazzjonijiet tekniċi
- EAN
- 4031093387712
- Type
- N
- Designation
- Ratio end mill RF 40
- Helix angle
- 30/32
- Corner design
- Schneidecke 90°
- Diameter range
- 16.000 mm – 30.000 mm
- Back rake angle
- 11
- Cutting material
- HSS
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 4-6
Dimensjonijiet u kodiċijiet tal-ordni
| Kodiċi tal-ordni | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibbiltà | Itlob prezz |
|---|---|---|---|---|---|---|---|
| 3706 16.000 | 68.00 mm | 48.00 mm | 123.00 mm | 16.00 mm | 16.00 mm | Fuq talba | |
| 3706 20.000 | 82.00 mm | 50.00 mm | 141.00 mm | 20.00 mm | 20.00 mm | Fuq talba | |
| 3706 30.000 | 99.00 mm | 56.00 mm | 166.00 mm | 25.00 mm | 30.00 mm | Fuq talba | |
| 3706 18.000 | 68.00 mm | 48.00 mm | 123.00 mm | 16.00 mm | 18.00 mm | Fuq talba | |
| 3706 25.000 | 99.00 mm | 56.00 mm | 166.00 mm | 25.00 mm | 25.00 mm | Fuq talba |