Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093682480, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 30, Back rake angle: 8, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: HB, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4031093682480
Type: W
Surface: bright
Designation: Roughing end mill GS 100 A (coarse teeth)
Helix angle: 30
Diameter range: 6.000 mm – 25.000 mm
Feed direction: with drilling
Back rake angle: 8
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 3

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
3127 14.000	36.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Fuq talba
3127 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Fuq talba
3127 10.000	29.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Fuq talba
3127 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Fuq talba
3127 6.000	17.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Fuq talba
3127 18.000	43.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Fuq talba
3127 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Fuq talba
3127 12.000	35.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Fuq talba
3127 25.000	66.00 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	Fuq talba