Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093377232, Cutting material: M42, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: medium, Number of cutting edges range (from/to): 4-6, Type of machine interface: B, Corner design: Schneidecke 90°

Speċifikazzjonijiet tekniċi

EAN: 4031093377232
Type: N
Surface: bright
Designation: Roughing/finishing end mills
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 6.000 mm – 36.000 mm
Back rake angle: 11
Cutting material: M42
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: medium
Type of machine interface: B
Number of cutting edges range (from/to): 4-6

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
3342 20.000	82.00 mm	50.00 mm	141.00 mm	20.00 mm	20.00 mm	Fuq talba
3342 8.000	42.00 mm	40.00 mm	88.00 mm	10.00 mm	8.00 mm	Fuq talba
3342 28.000	99.00 mm	56.00 mm	166.00 mm	25.00 mm	28.00 mm	Fuq talba
3342 14.000	58.00 mm	45.00 mm	110.00 mm	12.00 mm	14.00 mm	Fuq talba
3342 32.000	115.00 mm	60.00 mm	186.00 mm	32.00 mm	32.00 mm	Fuq talba
3342 10.000	49.00 mm	40.00 mm	95.00 mm	10.00 mm	10.00 mm	Fuq talba
3342 22.000	82.00 mm	50.00 mm	141.00 mm	20.00 mm	22.00 mm	Fuq talba
3342 18.000	68.00 mm	48.00 mm	123.00 mm	16.00 mm	18.00 mm	Fuq talba
3342 16.000	68.00 mm	48.00 mm	123.00 mm	16.00 mm	16.00 mm	Fuq talba
3342 12.000	58.00 mm	45.00 mm	110.00 mm	12.00 mm	12.00 mm	Fuq talba
3342 6.000	27.00 mm	36.00 mm	68.00 mm	6.00 mm	6.00 mm	Fuq talba
3342 25.000	99.00 mm	56.00 mm	166.00 mm	25.00 mm	25.00 mm	Fuq talba