Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.175 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093732420, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Feed direction: with drilling

Speċifikazzjonijiet tekniċi

EAN: 4031093732420
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 3.175 mm – 31.750 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: long
Number of cutting edges range (from/to): 4

Dimensjonijiet u kodiċijiet tal-ordni

Kodiċi tal-ordni	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibbiltà
3114 19.050	50.38 mm	51.22 mm	101.60 mm	19.05 mm	19.05 mm	Fuq talba
3114 4.760	19.33 mm	31.47 mm	50.80 mm	4.76 mm	4.76 mm	Fuq talba
3114 6.350	23.45 mm	40.05 mm	63.50 mm	6.35 mm	6.35 mm	Fuq talba
3114 25.400	54.51 mm	47.09 mm	101.60 mm	25.40 mm	25.40 mm	Fuq talba
3114 7.940	25.82 mm	37.68 mm	63.50 mm	7.94 mm	7.94 mm	Fuq talba
3114 9.520	31.88 mm	31.62 mm	63.50 mm	9.53 mm	9.53 mm	Fuq talba
3114 11.110	32.95 mm	36.90 mm	69.85 mm	11.11 mm	11.11 mm	Fuq talba
3114 3.170	11.72 mm	39.08 mm	50.80 mm	3.17 mm	3.17 mm	Fuq talba
3114 31.750	84.14 mm	68.26 mm	152.40 mm	31.75 mm	31.75 mm	Fuq talba
3114 12.700	34.01 mm	42.19 mm	76.20 mm	12.70 mm	12.70 mm	Fuq talba
3114 15.870	42.32 mm	46.58 mm	88.90 mm	15.88 mm	15.88 mm	Fuq talba