← ކެޓަލޮގް
ބޮޑުކޮށް ބެލުމަށް ފޮޓޯ މައްޗަށް ކާސަރ ގެންދަވާ
3468
Ratio end mill RF 100 AL
Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844021075, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Type: W, Helix angle: 30/29/31, Back rake angle: 8, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: HA, Feed direction: with drilling
ޓެކްނިކަލް ތަފްޞީލް
- EAN
- 4049844021075
- Type
- W
- Surface
- bright
- Designation
- Ratio end mill RF 100 AL
- Helix angle
- 30/29/31
- Diameter range
- 6.000 mm – 25.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 A
- Back rake angle
- 8
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 3
މިންތަކާއި އޯޑަރު ކޯޑުތައް
| އޯޑަރު ކޯޑު | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ލިބެން ހުރި މިންވަރު | އަގު ހޯދުމަށް އެދެން |
|---|---|---|---|---|---|---|---|
| 3468 8.000 | 27.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | އެދުމުން | |
| 3468 6.000 | 20.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | އެދުމުން | |
| 3468 20.000 | 57.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | އެދުމުން | |
| 3468 10.000 | 32.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | އެދުމުން | |
| 3468 12.000 | 39.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | އެދުމުން | |
| 3468 16.000 | 48.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | އެދުމުން | |
| 3468 25.000 | 66.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | އެދުމުން |