HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844394537, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Technische specificaties

EAN: 4049844394537
Type: N
Surface: AlCrN
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: medium
Type of machine interface: ~HA
Number of cutting edges range (from/to): 4

Afmetingen en bestelcodes

Bestelcode	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Beschikbaarheid
19951 14.000	62.00 mm	38.00 mm	100.00 mm	14.00 mm	14.00 mm	Op aanvraag
19951 10.000	56.00 mm	40.00 mm	100.00 mm	10.00 mm	10.00 mm	Op aanvraag
19951 12.000	61.00 mm	39.00 mm	100.00 mm	12.00 mm	12.00 mm	Op aanvraag
19951 3.000	18.50 mm	37.00 mm	60.00 mm	4.00 mm	3.00 mm	Op aanvraag
19951 20.000	87.00 mm	50.00 mm	141.00 mm	20.00 mm	20.00 mm	Op aanvraag
19951 16.000	73.00 mm	48.00 mm	125.00 mm	16.00 mm	16.00 mm	Op aanvraag
19951 4.000	23.00 mm	37.00 mm	60.00 mm	4.00 mm	4.00 mm	Op aanvraag
19951 8.000	43.00 mm	36.00 mm	88.00 mm	8.00 mm	8.00 mm	Op aanvraag
19951 6.000	29.00 mm	36.00 mm	68.00 mm	6.00 mm	6.00 mm	Op aanvraag
19951 5.000	27.50 mm	37.00 mm	68.00 mm	6.00 mm	5.00 mm	Op aanvraag