← Catalogus
Beweeg over de afbeelding om in te zoomen
6478
Ratio end mill RF 100 Sharp
Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844492349, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 11, Length picto milling: long+, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling
Technische specificaties
- EAN
- 4049844492349
- Type
- N
- Surface
- AlCrN
- Designation
- Ratio end mill RF 100 Sharp
- Helix angle
- 38
- Diameter range
- 1.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- long+
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Afmetingen en bestelcodes
| Bestelcode | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|---|---|
| 6478 4.000 | 16.60 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Op aanvraag | |
| 6478 6.000 | 18.70 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Op aanvraag | |
| 6478 20.000 | 49.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Op aanvraag | |
| 6478 14.000 | 33.60 mm | 45.00 mm | 83.00 mm | 14.00 mm | 14.00 mm | Op aanvraag | |
| 6478 10.000 | 29.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Op aanvraag | |
| 6478 5.000 | 17.25 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Op aanvraag | |
| 6478 16.000 | 42.40 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Op aanvraag | |
| 6478 12.000 | 32.80 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Op aanvraag | |
| 6478 3.000 | 12.10 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | Op aanvraag | |
| 6478 8.000 | 24.60 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Op aanvraag | |
| 6478 1.000 | 3.80 mm | 39.30 mm | 50.00 mm | 4.00 mm | 1.00 mm | Op aanvraag | |
| 6478 2.000 | 7.40 mm | 32.80 mm | 50.00 mm | 6.00 mm | 2.00 mm | Op aanvraag | |
| 6478 2.500 | 9.25 mm | 31.90 mm | 50.00 mm | 6.00 mm | 2.50 mm | Op aanvraag | |
| 6478 1.500 | 5.70 mm | 38.40 mm | 50.00 mm | 4.00 mm | 1.50 mm | Op aanvraag |