← Catalogus
Beweeg over de afbeelding om in te zoomen
6870
Ratio roughing end mill RF 100 AL
Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844268395, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Helix angle: 30/29/31, Back rake angle: 12, Length picto milling: medium, Number of cutting edges range (from/to): 3, Type of machine interface: HA, Feed direction: with drilling
Technische specificaties
- EAN
- 4049844268395
- Surface
- bright
- Designation
- Ratio roughing end mill RF 100 AL
- Helix angle
- 30/29/31
- Diameter range
- 6.000 mm – 20.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 A
- Back rake angle
- 12
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 3
Afmetingen en bestelcodes
| Bestelcode | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|---|---|
| 6870 6.000 | 20.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | Op aanvraag | |
| 6870 8.000 | 27.00 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | Op aanvraag | |
| 6870 16.000 | 48.00 mm | 48.00 mm | 108.00 mm | 16.00 mm | 16.00 mm | Op aanvraag | |
| 6870 10.000 | 32.00 mm | 40.00 mm | 80.00 mm | 10.00 mm | 10.00 mm | Op aanvraag | |
| 6870 12.000 | 39.00 mm | 45.00 mm | 93.00 mm | 12.00 mm | 12.00 mm | Op aanvraag | |
| 6870 20.000 | 57.00 mm | 50.00 mm | 126.00 mm | 20.00 mm | 20.00 mm | Op aanvraag |