← Catalogus
Beweeg over de afbeelding om in te zoomen
3364
Roughing end mill GS 100 A (coarse teeth)
Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093675604, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 30, Back rake angle: 8, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: HB, Feed direction: with drilling
Technische specificaties
- EAN
- 4031093675604
- Type
- W
- Surface
- bright
- Designation
- Roughing end mill GS 100 A (coarse teeth)
- Helix angle
- 30
- Diameter range
- 6.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 8
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 3
Afmetingen en bestelcodes
| Bestelcode | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|---|---|
| 3364 10.000 | 29.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Op aanvraag | |
| 3364 8.000 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Op aanvraag | |
| 3364 6.000 | 16.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Op aanvraag | |
| 3364 12.000 | 34.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Op aanvraag | |
| 3364 20.000 | 51.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Op aanvraag | |
| 3364 16.000 | 41.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Op aanvraag |