← Katalog
Najedź na zdjęcie, aby powiększyć
19968
Ball nose slot drill (2-fluted)
Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844217010, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: ~HA/HA, Feed direction: with drilling
Specyfikacja techniczna
- EAN
- 4049844217010
- Type
- N
- Designation
- Ball nose slot drill (2-fluted)
- Helix angle
- 30
- Diameter range
- 2.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 2
Wymiary i kody zamówieniowe
| Kod zamówienia | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostępność | Zapytaj o cenę |
|---|---|---|---|---|---|---|---|
| 19968 18.000 | 50.00 mm | 48.00 mm | 100.00 mm | 18.00 mm | 18.00 mm | Na zapytanie | |
| 19968 6.000 | 17.50 mm | 30.00 mm | 50.00 mm | 6.00 mm | 6.00 mm | Na zapytanie | |
| 19968 2.000 | 8.50 mm | 27.40 mm | 40.00 mm | 4.00 mm | 2.00 mm | Na zapytanie | |
| 19968 4.000 | 13.00 mm | 33.90 mm | 50.00 mm | 6.00 mm | 4.00 mm | Na zapytanie | |
| 19968 20.000 | 52.00 mm | 50.00 mm | 100.00 mm | 20.00 mm | 20.00 mm | Na zapytanie | |
| 19968 3.000 | 10.75 mm | 37.00 mm | 50.00 mm | 4.00 mm | 3.00 mm | Na zapytanie | |
| 19968 10.000 | 32.50 mm | 40.00 mm | 70.00 mm | 10.00 mm | 10.00 mm | Na zapytanie | |
| 19968 8.000 | 28.20 mm | 33.00 mm | 60.00 mm | 8.00 mm | 8.00 mm | Na zapytanie | |
| 19968 14.000 | 40.00 mm | 35.00 mm | 75.00 mm | 14.00 mm | 14.00 mm | Na zapytanie | |
| 19968 5.000 | 16.25 mm | 31.50 mm | 50.00 mm | 6.00 mm | 5.00 mm | Na zapytanie | |
| 19968 12.000 | 38.60 mm | 36.00 mm | 75.00 mm | 12.00 mm | 12.00 mm | Na zapytanie | |
| 19968 16.000 | 42.00 mm | 32.00 mm | 75.00 mm | 16.00 mm | 16.00 mm | Na zapytanie |