← Katalog
Najedź na zdjęcie, aby powiększyć
25506
Cutting insert for boring out and profiling
Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844237834, Cutting material: Solid carbide, Surface: bright
Specyfikacja techniczna
- EAN
- 4049844237834
- Surface
- bright
- Designation
- Cutting insert for boring out and profiling
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Wymiary i kody zamówieniowe
| Kod zamówienia | Total length | Shank diameter | Dostępność | Zapytaj o cenę |
|---|---|---|---|---|
| 25506 6.110 | 37.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.460 | 62.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.120 | 42.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.270 | 67.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.440 | 52.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.340 | 52.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.360 | 62.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.160 | 62.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.010 | 37.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.470 | 67.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.140 | 52.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.240 | 52.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.220 | 42.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.170 | 67.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.050 | 57.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.250 | 57.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.030 | 47.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.450 | 57.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.260 | 62.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.230 | 47.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.070 | 67.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.430 | 47.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.130 | 47.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.420 | 42.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.330 | 47.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.020 | 42.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.310 | 37.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.040 | 52.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.410 | 37.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.210 | 37.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.150 | 57.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.320 | 42.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.060 | 62.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.370 | 67.00 mm | 6.00 mm | Na zapytanie | |
| 25506 6.350 | 57.00 mm | 6.00 mm | Na zapytanie |