← Katalog
Najedź na zdjęcie, aby powiększyć
3433
End mill
End mill. Designation: End mill, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093379311, Cutting material: M42, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Type of machine interface: B, Corner design: Schneidecke 90°
Specyfikacja techniczna
- EAN
- 4031093379311
- Type
- N
- Surface
- bright
- Designation
- End mill
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 6.000 mm – 20.000 mm
- Back rake angle
- 11
- Cutting material
- M42
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 4
Wymiary i kody zamówieniowe
| Kod zamówienia | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostępność | Zapytaj o cenę |
|---|---|---|---|---|---|---|---|
| 3433 6.000 | 40.00 mm | 36.00 mm | 79.00 mm | 6.00 mm | 6.00 mm | Na zapytanie | |
| 3433 20.000 | 105.00 mm | 50.00 mm | 163.00 mm | 20.00 mm | 20.00 mm | Na zapytanie | |
| 3433 16.000 | 85.00 mm | 48.00 mm | 141.00 mm | 16.00 mm | 16.00 mm | Na zapytanie | |
| 3433 8.000 | 59.00 mm | 40.00 mm | 105.00 mm | 10.00 mm | 8.00 mm | Na zapytanie | |
| 3433 10.000 | 66.00 mm | 40.00 mm | 112.00 mm | 10.00 mm | 10.00 mm | Na zapytanie | |
| 3433 14.000 | 74.00 mm | 45.00 mm | 125.00 mm | 12.00 mm | 14.00 mm | Na zapytanie | |
| 3433 18.000 | 85.00 mm | 48.00 mm | 141.00 mm | 16.00 mm | 18.00 mm | Na zapytanie | |
| 3433 12.000 | 74.00 mm | 45.00 mm | 125.00 mm | 12.00 mm | 12.00 mm | Na zapytanie |