← Katalog
Najedź na zdjęcie, aby powiększyć
3089
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}], EAN: 4031093765909, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Feed direction: with drilling
Specyfikacja techniczna
- EAN
- 4031093765909
- Type
- N
- Designation
- End mill (4-fluted)
- Helix angle
- 30
- Diameter range
- 3.175 mm – 12.700 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Number of cutting edges range (from/to)
- 4
Wymiary i kody zamówieniowe
| Kod zamówienia | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostępność | Zapytaj o cenę |
|---|---|---|---|---|---|---|---|
| 3089 9.526 | 35.02 mm | 28.48 mm | 63.50 mm | 9.53 mm | 9.53 mm | Na zapytanie | |
| 3089 12.706 | 37.18 mm | 39.02 mm | 76.20 mm | 12.70 mm | 12.70 mm | Na zapytanie | |
| 3089 4.766 | 20.76 mm | 30.04 mm | 50.80 mm | 4.76 mm | 4.76 mm | Na zapytanie | |
| 3089 12.704 | 37.18 mm | 39.02 mm | 76.20 mm | 12.70 mm | 12.70 mm | Na zapytanie | |
| 3089 9.522 | 35.02 mm | 28.48 mm | 63.50 mm | 9.53 mm | 9.53 mm | Na zapytanie | |
| 3089 4.764 | 20.76 mm | 30.04 mm | 50.80 mm | 4.76 mm | 4.76 mm | Na zapytanie | |
| 3089 7.946 | 28.44 mm | 35.06 mm | 63.50 mm | 7.94 mm | 7.94 mm | Na zapytanie | |
| 3089 7.942 | 28.44 mm | 35.06 mm | 63.50 mm | 7.94 mm | 7.94 mm | Na zapytanie | |
| 3089 9.524 | 35.02 mm | 28.48 mm | 63.50 mm | 9.53 mm | 9.53 mm | Na zapytanie | |
| 3089 6.354 | 25.35 mm | 38.15 mm | 63.50 mm | 6.35 mm | 6.35 mm | Na zapytanie | |
| 3089 6.352 | 25.35 mm | 38.15 mm | 63.50 mm | 6.35 mm | 6.35 mm | Na zapytanie | |
| 3089 6.356 | 25.35 mm | 38.15 mm | 63.50 mm | 6.35 mm | 6.35 mm | Na zapytanie | |
| 3089 3.172 | 12.68 mm | 25.43 mm | 38.10 mm | 3.17 mm | 3.17 mm | Na zapytanie | |
| 3089 12.702 | 37.18 mm | 39.02 mm | 76.20 mm | 12.70 mm | 12.70 mm | Na zapytanie | |
| 3089 7.944 | 28.44 mm | 35.06 mm | 63.50 mm | 7.94 mm | 7.94 mm | Na zapytanie | |
| 3089 4.762 | 20.76 mm | 30.04 mm | 50.80 mm | 4.76 mm | 4.76 mm | Na zapytanie | |
| 3089 3.174 | 12.68 mm | 25.43 mm | 38.10 mm | 3.17 mm | 3.17 mm | Na zapytanie |