Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093674614, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HA

Specyfikacja techniczna

EAN: 4031093674614
Type: H
Surface: Signum
Designation: Hard multi-tooth end mill GH 100 H
Helix angle: 55
Diameter range: 3.000 mm – 20.000 mm
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 6-8

Wymiary i kody zamówieniowe

Kod zamówienia	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Dostępność
3715 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Na zapytanie
3715 18.001	46.00 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	Na zapytanie
3715 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Na zapytanie
3715 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Na zapytanie
3715 18.000	40.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Na zapytanie
3715 4.000	14.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Na zapytanie
3715 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Na zapytanie
3715 14.001	38.00 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	Na zapytanie
3715 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Na zapytanie
3715 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Na zapytanie
3715 12.000	32.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Na zapytanie
3715 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Na zapytanie
3715 16.000	39.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Na zapytanie